Tearing

Post your questions here and we'll all try to help.
Post Reply
xean
Met Resolume in a bar the other day
Posts: 13
Joined: Thu Aug 26, 2010 18:41

Tearing

Post by xean »

Hello,

I,m looking for a solution. If I use my 2 HD5770, with 3 Outputs I get tearing because auf deactivating V-Sync.
Resolume is working with 80 FPS and the Outputs 60FPS. On horizontal Camera Movements, you will see a string Tearing.

Is there any Solution For Example with an Nvidia Card to prevent it?

Or is it only possible with Matrox Adapters?

Thanks for your Solutions.

User avatar
4eyes
Hasn't felt like this about software in a long time
Posts: 88
Joined: Tue Oct 02, 2012 03:50

Re: Tearing

Post by 4eyes »

Why have you turned off V-sync?

xean
Met Resolume in a bar the other day
Posts: 13
Joined: Thu Aug 26, 2010 18:41

Re: Tearing

Post by xean »

@4eyes when its enabeld, the FPS be the half with every Output.

For Example:
1 Output = 60FPS
2 Output = 30FPS
3 Outputs = 20 FPS

and so on. Without I have constantly 80FPS

xean
Met Resolume in a bar the other day
Posts: 13
Joined: Thu Aug 26, 2010 18:41

Re: Tearing

Post by xean »

So i changed my graphic Cards to Nvidia. Works better than ATI. Becuase with multiple Output. its possible to enable V-Sync. T

I think with Resolume you soud prefere Nvidia Cards.

mfo
Is seriously in love with Resolume. Met the parents and everything
Posts: 325
Joined: Fri Oct 08, 2004 11:48

Re: Tearing

Post by mfo »

Dont know if this is related:
I had tearing issues as well, Nvidia card under Windows7. I turned out that disabling Windows Aero-Design was the problem! When switching to a basic design, assuming it would improve the overall performance, my output had tearing lines. Switching back to Aero solved the problem!

Post Reply