Resolume Forum

Hi, I just recently bought 2 midi-controllers from the korg nano-series; the kontrol and the pad.
The kontrol works perfectly fine, but resolume doesn't accept any input from my pad when trying to
midi-map ;s
I made sure both of the controllers are active in the resolume preferences ...

Anyone who can help me out ?

Thanks in advance !
Matt

try running them both through midi ox and then into resolume as a single input

Ok I tried changing the notes to control-change with the korg kontrol editor, but this doesn't work either.
As for the above mentioned method, could you explain it a little bit ?

Anyone any ideas ?

Thanks in advance !

have a proper search of the forum. i have a similar problem. there is a thread out there somewhere which explains it. i dont know myself but im going to try and figure this out now! its a pain in the ass. also check vjforums for threads and posts. similar things have been discussed!

The kontrol works perfectly fine, but resolume doesn't accept any input from my pad when trying to
midi-map ;s
I made sure both of the controllers are active in the resolume preferences ...

Does the NanoPad work as expected when you don't have the Kontrol connected ?

have a proper search of the forum. i have a similar problem. there is a thread out there somewhere which explains it.

I had a quick search, but I couldn't find anything relating to two Korg controllers. Which thread are you referring to?

Joris

Hey,

goto10 wrote:Does the NanoPad work as expected when you don't have the Kontrol connected ?

Unfortunaly no ;s tried in different setups; osx aswel on windows, same outcome.
I'm convinced of the potential power of this little drumpad, just the thing of getting it to work ...

goto10 wrote: I had a quick search, but I couldn't find anything relating to two Korg controllers. Which thread are you referring to?

Joris

http://www.resolume.com/forum/viewtopic.php?f=13&t=6666

So to keep things clear here:

@playform:
Your nanoPad doesn't work at all? What are the steps you're taking? Where is it going wrong?

@godzil:
Your nanoPad is working when connected first, but not when connected after the nanoKontrol? Is it getting enough power?

I'm having the same problem with 2 Korg Nano Kontrols. In Ableton Live it works fine but in Resolume I can't get the 2 controllers working at the same time.

- They are both on different midi channels (1 & 2)
- They use different CC notes (no overlap)
- They' re on different USB busses (also tried it via a hub)

If i turn off the input of one of the Kontrols in the preferences, close the preferences and open them again, both Kontrols are turned off.

I hope this information will help you, I would like to use both controllers in a while

goto10 wrote:@playform:
Your nanoPad doesn't work at all? What are the steps you're taking? Where is it going wrong?

I have both controllers connected; changed the global midi channel on both "1&2", have them using different
cc's; all configured with the korg kontroller editor.

In resolume I activate both of them in the preferences (midi input), when mapping the app and composition
only the kontroller seems to respond ;s