Index

Translations of this page:


Avenue 4.5 and Arena 5

Appendices:

Download PDF

Advanced Output

If you are spanning your output over several projectors, or using a mix of different outputs like LED screens, projector and pixel strips, Resolume provides a flexible way to control them all at the same time.

Using Resolume's Advanced Output, you can manage all sorts of outputs. You can use physical outputs like a VGA cable connected to a projector, a DVI cable to a LED screen, a capture card like a Blackmagic Intensity, a DMX signal sent to a pixel strip, or even virtual outputs like Syphon or Spout.

Using the Advanced Output, you can choose which outputs you want to use. And you choose how to use them by setting up which parts of your composition are sent to which output. This way you can send VJ content to the main area, while displaying a single line-up still on the monitors in the hall.

If you are doing a projection mapping show, you will use the Advanced Output to align your projected content to the physical object you are projecting on. When using LED processors, you can scale and resize your output to exactly fit the needs of the processor. If you are using DMX controlled lights, you can choose which fixtures you need to send to.

Basically, the Advanced Output is where the magic happens.

The Advanced Output is available on both Avenue and Arena. To get everything it has to offer, you will need Arena.

For a quick start on how to use the Advanced Output with LED screens or for projection mapping, check this chapter on creating input maps:

If you want to know the nitty gritty of all the features of the Advanced Output, everything is covered in the following chapters:


Page Tools