Are you blending or is each PJ screen independent from each other? If each screen is independent and you are not concerned with screen tearing when trying to blend several sources into 1 canvas then I would just snag a 4K SDI output card and use that with a decent GPU (4080, 3080ti, etc) nVidia limi...
Has been requested a few times (myself included) It would be nice if the video router would lock to the layer UID and not 'by position'. Same with ASS layer to slice routing. <3
Composition settings to change your comp size to 12,000 x 2160
Then in advanced output you can position your (3) 4K screens to match your output canvas.
Correct but you will also need a Sync II card and the outputs will need to be the same resolution and refresh rate. (2) A5000's will run about $4,000 and then you need the sync card for about $2,000 in addition. You can find FX4's on Ebay for around $2,000 as well.
A5000 should be fine since you're just needing (5) 3G signals. The issue with Gaming GPU's are that each output port has it's own clock. think of it as garbage in, garbage out. There's no external hardware like a sync generator that can fix the output coming out of a gaming GPU, so external converte...
That 5th output is the issue. Cheapest solution I've used would be to have a Quadro card and a FX4 or AJA HA5-4K. Grab the SDI FX4 if your PJ's have 3G SDI inputs. You'll need to add delay to the single output that isn't going to the splitterbox worst case, best case you don't need to. If you can gr...
Shouldn't matter, it's all about the PCIe Lanes and single core clock speed. Get what ever fits your budget and makes sense for the build. I've had good luck with both.
