What version of NDI tools do you have installed? What kind of switch/router? I am having issues recreating this. Tried connecting PCs directly to each other and over a switch i have. Resolume PC 1: v7.1, NDI tools 4.1, red background, animated vertical movement like you have , sending over basic NDI...

Do you really need fast detection for BPM. Normal is usually good enough for most cases. 2. You running Waveclock on Windows. Wavesum hasn’t made Windows software in at least 6 years, so you’re either using extremely outdated software or using a custom build of wave clock. In either case, nobody els...

Since as far as I can tell regular consumer cards don't link their physical outputs to anything in windows this can change every time you launch Resolume. So It can work perfectly one day and then the next everything is fucked up even though nothing has changed at all. What kind of card are you usi...

Do you have the windows display scaling set to 100% for your output? Everything is setup correctly, Resolume monitor output 4k, i see the screen in my nvidia settings, 100% scaled. Just to be sure, you say 100% in the nvidia setting, but the display scaling is set in the windows display settings pa...

This is a work around for now. The difficult part is I'm trying to put a "color wheel"/strobe rate at end of the corresponding bypass channels. This works for strobe - and colors for now. I have 13 colors to fit into 50% range, which is about 3.5-4% per color. Fine for now, but starts to b...

I'm on 7.0.5. Tried using envelopes. Using the envelope from the picture works as expected as long as operating the envelope directly or midi When I map DMX and send signal using DMX workshop from same pc and separate pc, I have to invert the signal (not that way with midi). It almost ignores the en...

Do we really need a full DMX channel for a bypass button? I realize since it is a toggle button, it is off at 0 and on at 1 which translates to 0% and 100%, but it seems like a waste using a full DMX channel for a toggle button. I've tried making an envelope to change the toggle value, but that does...

What kind of laptop? It is possible that the port you are trying to use is tied to the CPU and not the GPU. Been running into a few laptops lately where the usb-c with thunderbolt 3 support is actually run off CPU, switching to the generic usb-c port makes output run off GPU. Easy way to find out, o...

You’re possibly bottle necking somewhere The 8700 only supports 16 PCIE lanes Up to 1x16, 2x8, 1x8+2x4 (From Intel site) The 660ti is an x16 card, but runs at x8 because you have the BMD capture installed (x4 design) Depending on how your SSD is connected (M2 or SATA) could be causing issues (M2 gen...

1080p control monitor connected via dvi 4k@30 Datapath x4 connected via powered DP to DVI adapter 720p AJA HA-5 plus connected HDMI Disconnected everything plug in 1 by 1, flashing occur when connected HA-5. Disconnect HA-5, no flashing. Throw in a BMD DVI extender, DP to DVI cable, no flashing. Swi...