turning the gain up doesn't help?
in preferences / audio there is also a gain setting for the external fft input.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
no way. the waveform is shown on the right place. and its moving to the top in every band correct.
but the little triangle which is normally animated by the choosen frequency range is not moving.
somtimes it is moving completly from one side to the other but randomly and without any possibity to control it.
win 7 64 bit . resolume 5.0.1 demo.
in former versions(from v 1.1)
it was somtomes nessecary to change the buffer size an that problem was solved, but this time this trick does not work.
hallo in addition, the magenta colored triangles which are for the audio parameter are working proper.
?>?
the green triangles which are for the video paramters are not moving anyway.
could you post some screenshots of the parameters and audio preferences?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
hello everybody.
sorry but it sounds like really really crazy,
but,
if we open 5.0.1 a) with a complete empty composition, b) with a composition saved from an empty
composition on start up, then and only then the fft does not work!
if we open resolume with an empty or on empty comp based comp, and do nothing else than open the example comp, it works completly as usual.
and when it works, it works with new empty comps and based on new empty comps, till the next restart of resu.
absolutly crazy.
but after saving an example comp with new name, ti works on startup with this as last comp absolut correct,
and so we think its possible for us to life with.
thank you so much for all ideas, and the great support of Joris.