Page 1 of 1
Strobe effect breaks when freq to max
Posted: Mon Jul 02, 2018 13:54
by mfo
Topic says it all, when Strobe effect's frequency goes to "1.0" it stops flickering. "0.999" still works..
Re: Strobe effect breaks when freq to max
Posted: Mon Jul 02, 2018 16:54
by Arvol
This is normal behavior. Has been this way since I started using Resolume. Just map your shortcut to stop at .999
Re: Strobe effect breaks when freq to max
Posted: Mon Jul 02, 2018 20:38
by drazkers
mfo wrote: ↑Mon Jul 02, 2018 13:54
Topic says it all, when Strobe effect's frequency goes to "1.0" it stops flickering. "0.999" still works..
I have a lot of functionality built around 1.0 and 0.0 doing this. I assumed it’s a feature.
Re: Strobe effect breaks when freq to max
Posted: Wed Jul 04, 2018 14:25
by mfo
Arvol wrote: ↑Mon Jul 02, 2018 16:54
This is normal behavior. Has been this way since I started using Resolume. Just map your shortcut to stop at .999
of course, that's what i did. still seems a bug to me.
Re: Strobe effect breaks when freq to max
Posted: Wed Jul 04, 2018 16:16
by Joris
The extremes of the strobe frequency param are set to be completely off at value 0 and completely on at value 1. This is done on purpose. Think of it as strobing infinitely slow and infinitely fast
If you don't like that behaviour, you can define your own envelope for the frequency param and save that as your preferred effect preset.