Hi Guys,
I'm trying to use Resolume as a DMX controlled media server and am having an issue with the way I think its reading DMX.
This problem is this:
When I load the lx console show and go to the beginning of my cue list, all the DMX values should be at their home/default position, for example Opacity of each layer should be at 0.
On the lx console and in Resolume's DMX monitor those channels are reading as 0.
The problem is that the actual faders that are being controlled are not showing 0, they are at whatever state was previously left.
I think what I can put it down to is that Resolume is reading changes in DMX value rather than constantly reading the STATE of the dmx value.
The work around is to jog the values up and down so that Resolume catches up. This is difficult to do with a full universe of layers with a variety of different parameters. It can also cause issues when programming a show and I need to jump around the cue list.. as parameters don't set back to what they should.
Any suggestions or thoughts would be great.
Thanks,
Chris