Aliasing/Jagged edges only from SDI output (decklink duo)

Post your questions here and we'll all try to help.
Post Reply
wesleygarnett
Met Resolume in a bar the other day
Posts: 2
Joined: Wed Feb 20, 2019 18:31

Aliasing/Jagged edges only from SDI output (decklink duo)

Post by wesleygarnett »

We're getting weird artifacts on rounded edges from anything output of our decklink duo 2 SDI card. Here's a pic. We first thought it was just the LED scaler but it's visible on any monitor connected to the reso machine.

https://imgur.com/a/HV82Nn5

We're outputting 720p 59.94, the outputs are genlocked from our master clock and go through a ross vision switcher, so we cannot change the screen resolution or frame rate for the outputs. I've tried many different composition sizes, from those matching the pixel diminisons of the LED screen, to just 720p... doesn't seem to change anything.

I've put the same image on another machine running propresenter through an ultrastudio 4k and it looked perfectly fine so it seems to just be the resolume machine. This is visible on the LED walls AND any monitors we plug directly into the SDI out, so it doesn't seem to be an issue with the LED processor or scalar or the walls as it's visible on multiview TV's in the control room.

System information:
Resolume Arena 6 (Latest Update)
Decklink Duo 2 (Desktop Video V 10.11.4)
GTX 1060
MSI Mortar B360M

Any ideas would be appreciated as our event is on Friday. Thanks!

wesleygarnett
Met Resolume in a bar the other day
Posts: 2
Joined: Wed Feb 20, 2019 18:31

Re: Aliasing/Jagged edges only from SDI output (decklink duo)

Post by wesleygarnett »

UPDATE 2: arena 5.1.4 does not have this issue.

example pics. 1280x720 comp with content scaled down 50% to fit screen. aliasing is visible with no scaling as well.

resolume 6: https://imgur.com/a/9tSDiu8 (bad)

resolume 5: https://imgur.com/a/9tSDiu8 (good)

what's happening here.

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Aliasing/Jagged edges only from SDI output (decklink duo)

Post by Zoltán »

Both your screenshots are the same link ;)

We're in contact about this via mail right?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply