Resolume with ChamSys visualizer

Post your questions here and we'll all try to help.
Post Reply
elbundlo
Is taking Resolume on a second date
Posts: 36
Joined: Sun Sep 29, 2013 19:39
Location: Hastings, UK

Resolume with ChamSys visualizer

Post by elbundlo »

Hello good people,

Has anyone tried to output Resolume via the visualizer in ChamSys?

Here is what I have set up: A grid of 30 Pixelline 1044 (10x3), set to 54 channel mode. I have arranged them in the Advanced view and the pixels are in the right place on the Pixelline, and the DMX address is set for each Pixelline correctly. the Lumiverses are set to the target IP, which is my ChamSys desk.
I know that if I patch a pixelmap from magicQ, over the Pixellines, I can see the resulting output on the visualizer.
I would be interested to see if anyone has tried anything like this.

Cheers,

Paddy

elbundlo
Is taking Resolume on a second date
Posts: 36
Joined: Sun Sep 29, 2013 19:39
Location: Hastings, UK

Re: Resolume with ChamSys visualizer

Post by elbundlo »

I put a similar question to the ChamSys forum and got a reply saying this should be possible if Resolume supports CITP.
Does Resolume support CITP?
:roll:

User avatar
Arvol
Might as well join the team
Posts: 2771
Joined: Thu Jun 18, 2015 17:36
Location: Oklahoma, USA

Re: Resolume with ChamSys visualizer

Post by Arvol »

CITP needed to die back in 2012, it blows my mind that people still use it.
Resolume doesn't support CITP, as it shouldn't, as shouldn't any software, ever!

What Resolume can output, is Spout/Syphon and NDI. Any professional grade visualizer will support both of those protocols. Haven't used a Chamsys visualizer before, so I'm not sure if it supports either of those protocols or not.

elbundlo
Is taking Resolume on a second date
Posts: 36
Joined: Sun Sep 29, 2013 19:39
Location: Hastings, UK

Re: Resolume with ChamSys visualizer

Post by elbundlo »

I have now found that it is indeed possible to see the output on a Chamsys visualiser, so all good - it is all a question of setting the input/output for Artnet in the setup/view DMX I/O so the input/output does not clash. Videos available on YouTube on the Chamsys Russian channel.
The next question is: Has anyone managed to generate thumbnails from Resolume in the Chamsys media window?

Cheerio,

Paddy

User avatar
Arvol
Might as well join the team
Posts: 2771
Joined: Thu Jun 18, 2015 17:36
Location: Oklahoma, USA

Re: Resolume with ChamSys visualizer

Post by Arvol »

Thumbnails require CITP for your console, and no you can't do CITP with Resolume.

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Resolume with ChamSys visualizer

Post by Zoltán »

Has anyone managed to generate thumbnails from Resolume in the Chamsys media window?
Can it accept images via url?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply