Resolume Forum

Hi. Got 10 beamers on edgeblend.
Synchro ok.)!!
Using intel 10gb lancard and managed switch with 1gb ports and 10gb in from lan.
If using 1280x720 sreens, no prob.
If go to full hd screens, still having 60frames, but loosing coonections with ndi, screens start blinking and displaying content in seconds interval.
No source, content, no source. Randomly. Each one of the ten beamers.
If 1280x720 no prob.
Using deltacast neo n2h 10x
Data flow?
Anything?
Many thanks.

So many places where this could go wrong!

Any chance you can send a complete breakdown of your network including the type of switches and cables?

I'm pretty sure you read this one before? But just in case that not... here you go:

NDI Network guidelines

Did you also tried 1080p30 ?
What kind of cables do you use and how long are they ?
Did you use CAT spookys anywhere in your system?

As Oaktown said before, there are so many potential weak spots in your system. My very first intention would be AFTER I really really know that all my Network settings are right ... Change all the 10 Gbit CAT wires... with the highest grade cables I could get (Cat7). Or at the very very least....test all your network wires with a good CAT tester... NOT a CAT beeper. More something similar to this: www.pockethernet.com

I'd check CPU usage first on the sender machine.

Sooo
I have tried it on diferent machine, slower, but good enough, one lan card, onboard, gigabit killer
And
No prob!!!
So problem is on colision between internal and external cards.
Or in intel ext 10gbit

So smooth and nice!!

But I want to have 1pc, not two (2x5 beamers blended), not via osc, so I must solve this

I will manually screw up away internal lan...

Or use different one then intel

Btw, problem machine:
Cpu 30pro
Gpu1 31proc
Gpu2 12 proc
Temp 40 C
Water cool
2x1080
32ram
In killer 1gb
Ext 10gb intel
Board z170

Shurely killer denied in bios

Running a SLI but same prblm in nonSLI

Sooo
I have tried it on diferent machine, slower, but good enough, one lan card, onboard, gigabit killer
And
No prob!!!
So problem is on colision between internal and external cards.
Or in intel ext 10gbit

So smooth and nice!!

But I want to have 1pc, not two (2x5 beamers blended), not via osc, so I must solve this

....sorry dude.. I have no idea what you are trying to explain/tell us.

What CPU on your Z170 motherboard?

i7 7th gen