Page 1 of 1

DXV HQ high cpu usage when resolume is minimised

Posted: Sun Jan 19, 2020 22:53
by dradutu
as soon as i minimize arena 7 the cpu usage goes up.
only happens on dxv hq, not on normal quality, and only happens with arena 7, not with 6.
sometimes 2 threads, sometimes 4 threads.
gpu usage goes down.
8750h, obv, rtx2070 mq, win10, files on samsung pm951 nvme ssd. arena 7.1.0

quadthread
dualthread
gpu

also had some audio problems on my first gig with arena 7. sync, crackles... tried recreating today but could not. will try again but will use arena 6 for the next gigs. found multiple threads on this topic, is this a known issue with 7?

Re: DXV HQ high cpu usage when resolume is minimised

Posted: Mon Jan 20, 2020 16:19
by Zoltán
Is nvidia 3D settings set to Prefer maximum performance?

Re: DXV HQ high cpu usage when resolume is minimised

Posted: Mon Jan 20, 2020 18:08
by dradutu
yes, both global and program settings in ncp are set to prefer maximum performance

here's one more, trying to relocate from the clip panel does not work. in the deck it does
Image

Re: DXV HQ high cpu usage when resolume is minimised

Posted: Tue Jan 21, 2020 09:37
by Zoltán
On my Alienware laptop playing a 4k composition to 1080 output, 1x DXV HQ, CPU is around 14%, minimizing the UI, CPU usage of Arena goes to 7-8%, so not quite sure what's going on for you.
Have you checked the Arena process usage? maybe it's another program causing this.
trying to relocate from the clip panel does not work. in the deck it does
Hmm, weird. We'll check it out.

Re: DXV HQ high cpu usage when resolume is minimised

Posted: Thu Jan 30, 2020 00:19
by dradutu
on another laptop, clean install today win and arena, same behavior. 8750h, cpu goes up from 10% to 20%, just a couple of cores go way up, to 50-100%. nvidia on high performance
only in arena 7, arena 6, same hq dxv file, all good

Re: DXV HQ high cpu usage when resolume is minimised

Posted: Fri Jan 31, 2020 14:01
by Zoltán
Cores can be used by other apps.

How does the Arena.exe process CPU usage change?