Black Screen on starting v7.5.0 on mac

Post your questions here and we'll all try to help.
Post Reply
duttonpf
Met Resolume in a bar the other day
Posts: 5
Joined: Sat Mar 25, 2017 20:36

Black Screen on starting v7.5.0 on mac

Post by duttonpf »

I did the "install new version and re-launch" and now all I get are black screens each time a start Resolume

Version is 7.5.0 on a MacBook Pro running Big Sur 11.6

I can get icons at the bottom of the screen and if I control click Arena I can select "show all windows". I then see Resolume and it has loaded composition Example (1280 x 720). That window has a blue boarder. If I click anything , anywhere, all screens go black again. I have tried it with my second screen disconnected and effect is the same.

Any thoughts on how I can get Resolume to work again?

Philip

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Black Screen on starting v7.5.0 on mac

Post by Zoltán »

Sounds like you have an output enabled to your UI monitor.
Try Command+shift+D to disable all outputs, or check the Screen output settings in the Advanced output.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

duttonpf
Met Resolume in a bar the other day
Posts: 5
Joined: Sat Mar 25, 2017 20:36

Re: Black Screen on starting v7.5.0 on mac

Post by duttonpf »

You are spot on!
I had previously hooked up a third screen via the mini-display-port (the projector) but that was no longer connected. It seems Resolume was still displaying everything there even though it didn't exist.
Once I plugged it in again I could disable that output.
The problem had nothing to do with installing the new version.
Philip

Post Reply