Resolume TouchOSC layout for iphone or iPod RubenS style
Posted: Mon Nov 23, 2009 23:37
I've created 4 layers for TouchOSC
They control the basic controls of Avenue, and should work on Windows and Apple, however i only tested on windows. Installation instructions are in the readme file.
Layer1:
No explanation needed.
Layer2:
Rotary's control the corresponding dashboard rotary's. Toggle switches control effect 1 to 6 bypass.
Layer3:
5 layer x 11 clips selection
L1 to L5 selects the active layer. The fader controls the active layer AV fader.
Layer4:
B= bypass active layer S=solo active layer AV fader = Fader active layer C1,C2 = composition dashboard 1 &2, L1,L2 = Layer dashboard 1 &2.
I made this big button layer for after a few hours.
They control the basic controls of Avenue, and should work on Windows and Apple, however i only tested on windows. Installation instructions are in the readme file.
Layer1:
No explanation needed.
Layer2:
Rotary's control the corresponding dashboard rotary's. Toggle switches control effect 1 to 6 bypass.
Layer3:
5 layer x 11 clips selection
L1 to L5 selects the active layer. The fader controls the active layer AV fader.
Layer4:
B= bypass active layer S=solo active layer AV fader = Fader active layer C1,C2 = composition dashboard 1 &2, L1,L2 = Layer dashboard 1 &2.
I made this big button layer for after a few hours.
- Screenshot.jpg (72.04 KiB) Viewed 4856 times