Page 1 of 2
Mask Problems
Posted: Tue Dec 28, 2010 08:56
by manoeuvre
Hi there,
I'm having some problems with masks on a per clip basis.
I have 2 png files one red one blue, different mask per clip (grayscale .png same size as clip). When I launch the red clip it plays fine, displays the clip with the appropriate mask. When I launch the Blue it will continue to play the mask from the red clip.
Seems to happen when using the solid source too.
Resolume 3.3.1
Macbook Pro
Re: Mask Problems
Posted: Wed Dec 29, 2010 12:33
by Joris
Hey
From this description, it sounds like the mask is applied on the layer properties, instead of the clip properties. Could this be the case?
Joris
Re: Mask Problems
Posted: Wed Dec 29, 2010 15:13
by manoeuvre
No, definitely on the clip. Fresh scene two clips, two masks. no mask on layer or composition.
Re: Mask Problems
Posted: Wed Dec 29, 2010 15:14
by manoeuvre
2nd
Re: Mask Problems
Posted: Thu Dec 30, 2010 13:24
by Joris
That's definitely some weird stuff going on by the looks of it. Could you send us the masks?
Re: Mask Problems
Posted: Thu Jan 06, 2011 18:39
by Christoph
i had the same problems with .png masks, i put some masks on clips and first everything ran fine, but then resolume started to play clips with wrong masks. i checked three times if everything is applied right, it's really weird... at the moment i don't use masks at clips, just at layers because that works fine.
Re: Mask Problems
Posted: Fri Jan 07, 2011 11:49
by Joris
Yup. We were able to recreate this 100% and we're working on it. Strange business indeed.
Re: Mask Problems
Posted: Mon Jan 10, 2011 05:14
by ridiculoid
Ooooh this is an annoying one! Have just upgraded to 3.3.1 and now experiencing a similar bug.
I get different results depending on which layer I send a clip with a .png mask:
1. the mask displays as intended
2. the mask scales to twice the size
3. the mask doesn't display at all
No masks at the layer or composition level, only on the clip.
Re: Mask Problems
Posted: Mon Jan 10, 2011 08:03
by ridiculoid
On further investigation, many of my clips with .png masks don't appear in the output window(s) until I delete the mask. When I trigger a clip with mask attached, the clip preview displays in the layer preview window, just nothing happens. Deleting and / or re-applying the mask sometimes allows copies of the clip with a mask still applied to trigger normally, though the clips eventually fail to trigger again.
I've just tried the same composition in 3.2.0 and all masks work as expected.
Re: Mask Problems
Posted: Wed Jan 12, 2011 14:57
by Joris
Hey Ridiculoid
Could you provide some content, and steps to recreate the bugs you're experiencing?
Joris