While using resolume in DMX Mode, everything reacts on DMX Channel change, which is okay, during liveshow.
But, if resolume crashes during a show, and you have to restart it, it doesn't take the incoming FIXED dmx values to return to the last state.
For Example:
send a chase on the intesity channel (1) with the value 0 - 255 @ 200bpm ->WORKS (Changing Value)
send 120 on Channel 2 to select a content on layer 1 -> DOESN'T WORK (Fixed Value)
Maybe u can just implement something like a "Listener" for the dmx input at startup, which sets all the values to the channels.
This might b a big improvement!
Cheers
Andy