Page 1 of 2
Resolume doen't receive any information from TouchOSC
Posted: Sat Oct 07, 2017 11:27
by Kulcanhez
Hello,
I bought TouchOSC yesterday, and I uploaded the Resolume Layout for my iPad, and did the configuration correctly (check pictures). I'm able to receive informations, if I activate some layer it appear on iPad but it doesn't send any information, I click everywhere but nothing happens. I already tried to disable the Little Snitch.
https://imgur.com/a/voII6
Thank you very much!
Re: Resolume doen't receive any information from TouchOSC
Posted: Sat Oct 07, 2017 12:11
by Zoltán
Double check your computer's and IP address, and check firewall settings, maybe the OS firewall is blocking incoming connections.
Re: Resolume doen't receive any information from TouchOSC
Posted: Sat Oct 07, 2017 15:25
by Oaktown
Also make sure you don't have a conflict on port 8000.
Re: Resolume doen't receive any information from TouchOSC
Posted: Sat Oct 07, 2017 15:39
by Oaktown
Have you tried changing the ports in TouchOSC to match the default ports in Arena (7000/7001)?
Also I can't tell in your screenshot but are you seeing Arena as a host in TouchOSC. See picture below of what you should see:
Re: Resolume doen't receive any information from TouchOSC
Posted: Sat Oct 07, 2017 15:57
by Oaktown
Wait a second! Are you using the Resolume (by Diego Battini v1_2).touchosc file you found on this forum with Arena 6 by any chance?
If you are, nothing will work because the OSC syntax has changed!
So for instance /layer1/clip1/connect in R5 is now /composition/layers/1/clips/1/connect in R6 etc....
So you'll have to change everything in that layout to get it to work.
Re: Resolume doen't receive any information from TouchOSC
Posted: Sat Oct 07, 2017 16:27
by Zoltán
Oaktown wrote:Also I can't tell in your screenshot but are you seeing Arena as a host in TouchOSC.
I don't think that resolume 5 will show up in touchOSC, R5 doesn't support OSC zeroconf (I think that screenshot is from R5)
R6 does and shows up for me in touchOSC.
Re: Resolume doen't receive any information from TouchOSC
Posted: Sat Oct 07, 2017 16:35
by Oaktown
Test this one with Arena 6
Re: Resolume doen't receive any information from TouchOSC
Posted: Sat Oct 07, 2017 16:40
by Oaktown
(I think that screenshot is from R5)
Yes I just realized that his screenshot of Arena preferences is from R5!
Re: Resolume doen't receive any information from TouchOSC
Posted: Sun Oct 08, 2017 14:19
by Kulcanhez
Hi guys,
Sorry for the late reply. I am honestly amazed with all the answers, I wasn't expecting that. Thank you very much! I'm not quite sure what I did but it's working now. I simply change the ports for the defaults one and changed my ip address.
Once again thank you all!!
Re: Resolume doen't receive any information from TouchOSC
Posted: Mon Oct 09, 2017 19:13
by pfelberg
Oaktown wrote:...nothing will work because the OSC syntax has changed!
So for instance /layer1/clip1/connect in R5 is now /composition/layers/1/clips/1/connect in R6 etc....
So you'll have to change everything in that layout to get it to work.
You are kidding me. Damn!
Hours of OSC designing and mapping on trash.
