Resolume Forum

I understand but that would force me to replace my config.xml file with yours whereas if you just send me the screens setup xml file, I can move it to the right folder and look at it.

just remade it real quick

More info on screens/setup

Control Screen: 1920x1080@60
Main screen: 4mm 1408x640 pixel, 1440x900@60 resolution on card
Hotel Feed (into a tricaster): 1920x1080@30 (AJA DVI over SDI converter)
Overhead LED: 6mm 1728x480 pixel. 1920x1080@60 resolution on card
Booth/Table LED: 8mm 384x288 pixel. 1280x1024@60
EBC Side LEDs: 8mm 128x576 pixel, rotated 90. 1280x1024@60

I would be the first to say that I don't really understand where or how the Layer Router can be used effectively so any LR workflows are experiment city to me.

If I could add one point, with reference to this...

fob67cry wrote: - Layer 2: Black slide at 100% Add- I use the [Solid Color with 0% brightness]

If one sets the Clip or Layer Opacity of the Layer 1 clip to zero, the LR still renders it at full opacity so there is no need for the black slide.

Sadler,

If one sets the Clip or Layer Opacity of the Layer 1 clip to zero, the LR still renders it at full opacity so there is no need for the black slide.

The idea behind the black slide/layer is to isolate the source layers from the layer router layers. That way all the sources are playing beneath the opaque layer (black slide) and I have full control of my layer router layers. Since I don't do the layer input assignment in the advanced output, If I didn't have the black layer, everything would be rendered in the composition