Record video switcher main output.

[BuboyIX]

Hello,

I would like to know if what are the ways to record off a video switcher? I want to record the main output of the switcher. What HD recorders (hardware/software) can you guys recommend? I prefer to record in full HD given that the switcher can output 1080p.

[drazkers]

I really like the aja ki pro.

[cosmowe]

I do it with a second notebook with a USB 3.0 Magewell HDMI/SDI Capture Dongle and the free Open Broadcaster Software.

[BuboyIX]

Thank you for your suggestions. How about for backup? I assume a similar setup is required.

[Oaktown]

For HDMI I use the Ninja 2.

If you want a backup, I would get two paired with an upstream DA. Don't use the through port on the first recorder in case of hardware failure. Are you outputting via HDMI or SDI?

[BuboyIX]

What is an "upstream DA"?

I can either use HDMI or SDI, as I come across a lot of switchers too aside from our own.

[Oaktown]

What is an "upstream DA"?

Distribution Amplifier before your recorders.

You might want to consider getting something that can do both HDMI & SDI

[BuboyIX]

Is that different from a splitter? Does the term "splitter" apply only on HDMI, DVI and VGA?

[Oaktown]

Is that different from a splitter?

A splitter is a 1x2 distribution amplifier assuming it amplifies.

A great one for you since you want to be flexible from project to project would be the Decimator MD-HX paired with a couple of SDI recorders.

[BuboyIX]

Thank you for this info Oaktown. Will definitely look at the Decimator MD-HX.