Automatic screen selection in advanced ouptut

Just let it all out, buddy. You're among friends here.
Post Reply
mire
Met Resolume in a bar the other day
Posts: 1
Joined: Wed May 19, 2021 10:22

Automatic screen selection in advanced ouptut

Post by mire »

Hi there !

We often use Resolume (Arena 5 & 6) on stand-alone mediaservers.
We have configured daily automated shutdown and startup.

It appears that sometimes, our videoprojectors or screens are not powered up when Resolume starts and so it cannot be selected in advanced output.

When screens turn on once again, Resolume doesn't switch to it without manual intervention (click on output > advanced output > select screen > save and close).

Is there any way to let Resolume switch automatically from virtual output to our preset on the fly ?

Thank you for your reply,

Mire

User avatar
He2neg
Wants to marry Resolume, and Resolume said "yes!"
Posts: 938
Joined: Fri Nov 22, 2013 21:34
Location: Berlin, Germany

Re: Automatic screen selection in advanced ouptut

Post by He2neg »

You can use Edid Minder in the signal chain of your outputs. You allways should do with fixed instaltions ;)

Then Resolum allways think there is a screen and dont care if its on or off

You sure will find multiple products when you search for edid minder / emulator / edid simulator etc...



If EDID is new and you never heard of it you can read till you dont want anymore here:

https://www.extron.com/article/uedid
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~

Post Reply