You need to put the entire OSCP5 folder into Processing/libraries. That way the full path is Processing/libraries/oscp5/library/oscp5.jar - NOT processing/libraries/oscp5.jar. Look at the other Processing library folders and you will see what I mean.inzieye wrote:I'm still in trouble...
With Processing I can't use it because it tell me that "the package "oscP5" does not exist" but I put the OSCP5.jar file in the folder Processing/libraries. Am I wrong?
OSC has nothing to do with MIDI, so IAC driver will not affect it at all. It is using the network connection on your computer, that is why you have to specify IP addresses and ports. Make sure you have OSC receiving enabled on Resolume 3 (preferences). You will have to do a little bit of programming in Pd to convert the OSC received from TouchOSC into Resolume OSC commands. For example, TouchOSC will send something like /2/fader1 <x> and you need to convert that into something like /layer1/video/opacity/values <x>.inzieye wrote:With Pure Data, I can run TouchOSC (I mean PD recognize my Ipod/TouchOSC signal but I'v got some problems for sending signal to Resolume. I use IAC Driver in the Audio/MIDI config of my Macbook and I activate in the output of PD and in the input of Resolume but nothing happen. When I use TouchOSC and try to configure MIDI mapping, nothing happen...
Or you could just hack the TouchOSC example patches to output the Resolume commands in addition to the TouchOSC feedback.