multiple audio channels

"Where is Feature X? I need Feature X! How can you not have Feature X?"
Post Reply
Supernova
Is taking Resolume on a second date
Posts: 39
Joined: Tue Nov 03, 2015 18:05

multiple audio channels

Post by Supernova »

Hi,
I just got a request from a client to basically have audio output 1&2 cover all the audio from layer 1, and audio output 3&4 to cover all audio from layer 2. I know in Resolume 5 only two audio channels were supported. Is this still the case in Resolume 6?
If so, what would be a good work around for this need? Would it be practical/possible to make layer 1 only output on the left audio output, and layer 2 only output on the right audio output?
Thanks in advance!

Online
Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: multiple audio channels

Post by Zoltán »

Resolume 6 also outputs on 2 channels.
2x stereo outputs you need is not possible in Resolume currently.

You could do 2x mono as one stereo output by panning the layers to the left and right respectively.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply