Alright guys, let's figure out if this is actually possible or not.
I need help with controlling 24-30 TVs from 1 computer.
The goal:
The TVs don't need to be sent HD - whatever is the max they can get with any setup is fine (480p, or instance).
The setup:
I need to know more about how Resolume Arena uses other GPUs. I know that it officially only supports 1 GPU, but I thought it could pull from the outputs of other GPUs?
If so, my thought is 3 NVS 810s to get 24, and buy a 1080Ti that does all of the actual processing for Resolume. The footage won't be more than 4K, which is why each of the screens doesn't need to get much individual resolution.
I had considered doing just one NVS 810 with MST Hubs, but I found a post here that said it doesn't increase the total number of outputs (not useful for me in this situation).
I've also considered TripleHead2Go on each of the 8 outputs, but I read on their site that you can only use up to 2 per computer. I'm not sure why that would be since it takes an signal and splits it into 3... I would think that should be able to be done as many times as needed, but if someone has more experience with it, please comment!
If you know a way to do it with multiple computers that would still be in-sync (video wall), that works too!
The beg:
Please, if you have any experience in something like this, I need help. I've been researching this for a while, but I know someone has to have done something like this before. Thank you!