Page 1 of 1

Better and cheap

Posted: Thu Dec 20, 2018 08:40
by moha20106
Hi all,
I'm new here,
I'm going to build new pc for Arena and thinking about the better GPU and cheap
All my work with Arena will not be more than :
1- Splitt the output to 2-3 GPU card outputs to collect one LED display image
2- connect the camera output to my PC over Blackmagic mini recorder card no.1
3- connect the laptop hdmi output to my pc over Blackmagic mini recorder card no.2
(my PC will have 2 Blackmagic mini recorder cards)

So the show will be as below :
1-The one layer with background img will be the full screen
2- one more layer with live camera input will be in the top-left of the screen (small PIP)
3- one more layer with laptop input (presentation) will be in top-right of the screen (small PIP)

This is all my work, my question is :
Do i need hi-end GPU like 1080ti ? or the 1060,1070, 960, 970 and 1050 will be work fine with my show?
Note :i have 2 processors 3.2Ghz each one
16GB RAM DDR3

Sorry for my bad English

Re: Better and cheap

Posted: Thu Dec 20, 2018 10:26
by philmcrackin
What is the output resolution of your LED display image? I think any of those GPU should work fine. Also make sure you use SSD for operating system boot drive.

Re: Better and cheap

Posted: Thu Dec 20, 2018 16:47
by moha20106
philmcrackin wrote: Thu Dec 20, 2018 10:26 What is the output resolution of your LED display image? I think any of those GPU should work fine. Also make sure you use SSD for operating system boot drive.
The maximum resolution for each output will be width-2048pixels
hieght-1600pixels
This is all i need for each output

Im thinking for GPU card called Nvedia K1200,
I know its old, but for example :
It have 4x DP 4k outputs, 4GB DDR5 VRam
Can i use it with the main GPU card to maximize the output slots?
Also it will help me for 4K resolution outputs