Ok, now with my old system described on my last thread (the new is for one output projector), I setup two VGA Cards for 3 differente outputs. A 8500GT 512 Ram with main screen + one fullscreen oputput (layer 1), and a 9400GT 1GB ram with each full screen output (layer 2 & layer 3 respectly). OK, windows XP works fine with this setup, but Resolume 2.41 or Avenue not, with different issues:
Resolume 2.41, after setup the outputs, not work on any screen, but one screen have a lot of corrupted images (as a hardware error, bunch of point or lines), only deactiving one screen works (main screen + layer 1 + layer 2 for example).
Avenue not work, in any screen, with any config. After setup (for example) an large output (1920x480 for three layers distributed on 640x480 side by side) no have any image output. And preview show only layer 1 & layer 3 but not layer 2.
And another issue, when Avenue restart, all "mixing modes" disapear. Only show "Alpha" but "none" on the list. And "Alpha" is in yellow (text & background)
What is the problem? The video cards? the drivers? the program?
I try running two versions of resolume (2.41 & 2.3) at same time but only one program work fine.
All graphic cards are PCIe, I can add a 3th PCI card but first need to know where is the problem.
I need to work with three different outputs (PLASMAS for promotional flyers at the entrance hall, LCD for Price list at the bar and Plasmas for funny images at the dancefloor).