lost in the harware market

Bro, does your rig even lift?
Post Reply
memg
Met Resolume in a bar the other day
Posts: 1
Joined: Sat Feb 10, 2007 03:07

lost in the harware market

Post by memg »

Hi.
Firstly, I should say that I know VERY little about computers.
I was running Resolume on a Acer Ferrari 3200 and it was ok until one point. Now when I run Resolume on it the computer simply shuts down after a little while.
I want to buy a new computer, which can be Mac as well. Could you please recommend me what should be my next buy?
Thanx a lot,
m

suvanto
Is taking Resolume on a second date
Posts: 34
Joined: Thu Dec 22, 2005 10:09
Location: Helsinki, Finland

Post by suvanto »

hi
your machine may have problems with its motherboard, which means you
really need a new computer. it is also possible that it only needs good cleaning.
enough dust inside the machine can cause that kind of a problem. i recommend
that you take it to the nearest computer service and let them check it out.
good luck,
suvanto

alchemist
Hasn't felt like this about software in a long time
Posts: 63
Joined: Sat Jan 28, 2006 00:33

Post by alchemist »

Your laptop may be simply overheating - after some time vent ducts get dirty and cooling is not that efficient anymore. You may try using an active cooling pad.

In terms of new machine - it depends what you want it for.
Dual core Intel seems a good choice - both in PC and MAC.

Basic
Wants to marry Resolume, and Resolume said "yes!"
Posts: 707
Joined: Mon Feb 05, 2007 09:39
Location: UK

Post by Basic »

im after a new machine and i want to build this one and the thing is ive never built before. where should i start? i mean ive added new hdd's, graphics cards and that so im not all that new to that but im def a newbie to building! thanks :P

Post Reply