We are having issues with a 2-projector blend and I can't figure out what the problem could be.
One of the projectors is flickering back to the previous cue (see video at https://www.dropbox.com/s/3s48zb1dc4djd ... kering.mp4). We've run through the composition a dozen time after the show without any glitches so I can't tell what's happening.
The set up is as follows:
- Media Server: Antec TAKE 4U, Windows 7 PRO 64 bit, Intel Core Duo 6850 2 at 3GHz, FSB 1333MHZ, Chipset P35, 8GB 800 MHz RAM
- Graphics card: Radeon 5870 Eyefinity 6
- Monitor: 20" HP LED monitor
- Projectors: Sanyo PLC-XF35 + LNS-W05 lenses + POA-MD13NET network cards to control the projectors through the network
- Signal distribution:
1 active mini displayport to DVI adapter and 6' DVI cable to monitor
2 active mini displayport to VGA adapters (Accell B101B-002B) to 6' VGA cables to VGA amp to 100' VGA cables to 5-BNC adapter (RGBVH)
- Network: Cisco Linksys Factory E1500 WIFI router with
1 @ 6ft CAT5e ethernet cable to computer
2 @ 100ft CAT5e ethernet cables to projectors
1 @ 200ft CAT5e cable to remote station using RealVNC (that was used during tech to program the show from the house since the server is backstage)
WIFI connection to iPhone
- Cueing: iPhone running Luminair with DMX over Artnet. The only DMX channel used is #5 to go from column to column in theatrical cueing style
Any thoughts?