drazkers wrote:Strangely enough I just finished a country tour using a Jands S3 for control of multiple Resolume 5 copies. Was actually a pretty awesome setup when networked to the LD.
So you can't have two devices outputting artnet on the same universe, it crates a conflict. You actually have the flow backwards.
You want to be sending Art-Net control data to Resolume on a safe universe. Say Subnet 10, Universe 1.
Then you want to be outputting all your Pixel Data from Resolume back to your lighting board. Say Subnet 0, Universe 1 for your output.
You want to do an artnet merge in the console and then make sure you have your fixtures in Jands set to HTP.
Here is the problem, i've successful used this setup with Chamsys and Grandma2. Never with Jands and i'm not sure if Jands does a artnet input/merge.
If you can confirm the Jands and Byron 2.3 can handle an artnet input then my solution will work for you nicely. The key is using the lighting board for all the logic not Resolume, boards are designed for dmx data and logic. Its not the focus of Resolume to handle DMX routing, when dmx mapping resolume doesn't even distinguish between input universes, just handles values.
so I'm very limited on my channel count, so I can't run 100ft of pixel tape from vista (which is something like 2500 dmx channels). so i wanted to do all my mapping in resolume and use the 16 universes of Artnet to run to an ENTTEC Pixelator, which would then be distributed to all the LED strips on my stage. but i would love to still be able to have all the dimmer chases and the "night sky twinkle" effect that i can create in vista. what are your thoughts on how i can achieve this? also i would love to see some pics from your rig for ideas on using resolume in line with a lighting console!