Few bugs Arena 6 ?

[madido]

Hello,

probably it's because I've just start to scratch the surface with Arena 6, but there are some things I would ask about;

- If I delay some screen in advanced output, video signal is OK, but controls (for example master of the composition have strange behaviour.
- if I change timeline settings on a clip (loop direction etc) and I switch to SMPTE, when I come back to timeline parameters are resetted and the clip continue play even if is set to play from the start
- How can I enable NDI inputs? I cannot find it in sources
- It would be nice if Text Animator source and effect could share the presets

Thank you

Stefano

[Zoltán]

Thanks for reporting these,

Hello,
probably it's because I've just start to scratch the surface with Arena 6, but there are some things I would ask about;
- If I delay some screen in advanced output, video signal is OK, but controls (for example master of the composition have strange behaviour.

Could you elaborate on this, what do you mean by strange behavior exactly?

- if I change timeline settings on a clip (loop direction etc) and I switch to SMPTE, when I come back to timeline parameters are resetted and the clip continue play even if is set to play from the start

Setting the clip transport discards the old setting of the clip in R6, this behaves differently than R5, I'll create a ticket. #10160

- How can I enable NDI inputs? I cannot find it in sources

NDI sources will show up on the bottom of the list of the Sources panel once they are available.
Assuming your firewall is set correctly (not filtering NDI and MDNS),
You can then drag and drop them to the composition.

- It would be nice if Text Animator source and effect could share the presets

The preset file xml-s are different structure for effects and sources, so I'm not sure if that's possible.

[madido]

Could you elaborate on this, what do you mean by strange behavior exactly?

For example if I lower the master, brightness is different in delayed outputs. It's ok in advanced preview, but not in output signals.

[Zoltán]

Could you elaborate on this, what do you mean by strange behavior exactly?

For example if I lower the master, brightness is different in delayed outputs. It's ok in advanced preview, but not in output signals.

Thanks, this will be fixed in an upcoming release. (ticket #9901)

[Kadete]

NDI stop showing on my sources what could happen? already rebooted.
Can detect my BlackMagic, but no NDI source.

[Oaktown]

check your firewall settings

[Kadete]

check your firewall settings

First thing that i did. i turn off both windows defender + firewall to check if was that.
Still no luck. I Had today but then resolume crashed trying to connect blackmagic. When i restarted NDI was missing.

[joshuadmello]

Even I've had my NDI sources vanish after 6.0.2 update.

Solutions?

[Zoltán]

Even I've had my NDI sources vanish after 6.0.2 update.
Solutions?

mac or windows?

[joshuadmello]

Even I've had my NDI sources vanish after 6.0.2 update.
Solutions?

mac or windows?

Windows.

I had to roll back to 6.0.0 to have them appear again. Going to do another test with 6.0.2 today.