Soft Edge with projectors in different directions

Post your questions here and we'll all try to help.
Post Reply
VinicDiet
Is taking Resolume on a second date
Posts: 33
Joined: Wed Oct 14, 2015 23:57

Soft Edge with projectors in different directions

Post by VinicDiet »

Hello everyone. I would like to know if it is possible to use the following projector configuration in order to cover an ice skating rink as per the attached image.

My question is whether I will have problems with the two top projectors I intend to use horizontally in relation to soft edge with the three projectors that are in vertical.

Sorry about my bad English, and thanks everybody in advance.

Best regards,
Viniciushttps://resolume.com/forum/viewtopic.php?f=6&t=18728
Attachments
iceskating_court.jpg

Zoltán
Team Resolume
Posts: 7075
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Soft Edge with projectors in different directions

Post by Zoltán »

Should be doable in Resolume.
Have you tried the arrangement in the advanced output?

Also moved topic ;)
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

VinicDiet
Is taking Resolume on a second date
Posts: 33
Joined: Wed Oct 14, 2015 23:57

Re: Soft Edge with projectors in different directions

Post by VinicDiet »

Thank you Zoltán...

I did it in the advanced output and works perfect there.

:)

Post Reply