Delay for slices

"Where is Feature X? I need Feature X! How can you not have Feature X?"
Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Delay for slices

Post by Zoltán »

Indeed Delay option is only available for physical outputs. In your original post you wrote you want to delay your direct output.

Try to use a DelayRGB effect on the Composition, with the Same R, G, and B values. You can sync them up quickly by dragging them to a Composition dashboard dial.

Or try delaying the NDI signal on the receiving side.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

bandaide
Met Resolume in a bar the other day
Posts: 9
Joined: Wed Oct 23, 2019 01:53

Re: Delay for slices

Post by bandaide »

+1 for adding delay to ndi outputs pls

Aperion
Met Resolume in a bar the other day
Posts: 1
Joined: Fri Jun 10, 2022 14:40

Re: Delay for slices

Post by Aperion »

+1 for Slice delay and/or virtual output delay.

Had an event tonight where the venue has a physical HDMI port that then gets split up and sent to 9 TVs that form a TV wall with an outdated splitter. Unfortunately this splitter does not keep all TVs in sync. Could have easily accounted for this by using a slice for each TV's individual space and then delay each splice to offset the TVs as required to bring the whole wall into sync.

Unfortunately no option available.

Splitting the composition into layers and applying RGB Delay seemed like too much work.

Tried routing each slice to virtual output and then recombining into a physical output, thinking each entire virtual output could be delayed. No such option.

It's a shame delay is only limited to an entire physical out. Would have really benefitted from more advanced delay options.

Post Reply