Hi there,
I am running a Resolume 6 project from my Mac outputting to 3 projectors. The projectors are wired with hdmi to ethernet adaptors and my display settings on system preferences have been set to custom 1080p/50 gHz (instead of 60 which was the display default).
Sometimes on my advanced mapping settings I would have to shift between display 2 and 3 for projectors 1 and 2 and vice versa, sometimes resolume would pick the right display and others not. Some sort of confusion between system preferences asigned monitors and advanced settings, that would be easily sorted. Apart from that the system was 100% stable, has never given me issues during shows.
On Friday a damaged hdmi cable on projector 1 gave me flashes on that projector and made projector 2 lose its signal a couple of times. I have now replaced the hdmi and ethernet cables on that projector and it seems like hardware-wise I'm covered. Running on the same adaptors.
However, now, I seem to randomly lose signal once in a while either on projector 1 or projector 2. Black screen and spinning wheel of 3-4 seconds and then back to the image.
I did reset all projectors with their adaptors (unplugged, replugged, reset system preferences), have restarted resolume a few times, but still can't go back to having a stable system.
Any advice on what to do? I would really appreciate.
Thanks