Network trigger from Resolume to Madmapper/ 2 macs

Just let it all out, buddy. You're among friends here.
Post Reply
eratatat
Met Resolume in a bar the other day
Posts: 11
Joined: Tue Sep 20, 2016 10:01

Network trigger from Resolume to Madmapper/ 2 macs

Post by eratatat »

Hiya.
Sorry for the basic question here.
I have one Mac running Resolume Arena and would like to make it the master to a slave computer running madmapper. My cues are basic (next column on resolume should trigger next column on madmapper).

I understand that best way is to link them with ethernet cable and go for osc? I also found midi audio setup in a tutorial, but not sure if I can send out midi signals, that was possible with Ableton.

Thanks!

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Network trigger from Resolume to Madmapper/ 2 macs

Post by Zoltán »

Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

shudder_inc
Is taking Resolume on a second date
Posts: 16
Joined: Sun Dec 27, 2015 06:54

Re: Network trigger from Resolume to Madmapper/ 2 macs

Post by shudder_inc »

The Audio MIDI Setup app in macOS should be able to do this for you. Once the computers are set up, the network session should show up in preferences as a MIDI device. Then set Resolume to output and MadMapper to input.

https://support.apple.com/guide/audio-m ... ms1012/mac

I used the above link and with one computer started a session, launched Resolume, and the network session appeared as a MIDI device. I've no MadMapper experience but I imagine it's a similar process

Post Reply