I experienced an issue when sending NDI streaming data to the Capture Visualizer via a network. Both computers were on the correct network and showed a connection, however the NDI data from Resolume was not showing up in the Media section on Capture. I tried everything I could find online to solve this issue to no avail. The solution I found is below:
On the computer running Capture (in my case a PC running windows 10)
1.open Network and Sharing Center
2.open 'Change advanced sharing settings' - left hand column
3. open the 'All Networks' section
4. Under Media Streaming - click on 'Choose media streaming options...'
5. Allow access
This was the only solution I could find. I did also follow resolume's guidance and disable the Wifi Adapter on the computer sending the NDI signal.