VRAM usage

Post your questions here and we'll all try to help.
Post Reply
Met Resolume in a bar the other day
Posts: 5
Joined: Tue Aug 11, 2020 12:16

VRAM usage

Post by DTBerlin »


i build a Wire effect to do slomo of an live Input and also to DJ Scratch through a live input (the effect is applied to a Video Router referencing the input device).
It works pretty well but takes a lot of VRAM, as you mentioned in your Post.
Thats not the Problem per se, however it doesn´t free up its VRAM usage when the Clip is deactivated.
When i activate the Clip with the effect once, thats 40% VRAM gone till i restart Resolume.
Is there a way i can fix it in Wire?

Team Resolume
Posts: 6898
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Resolume 7.11 | Apple Silicon Compatible & Delay Effects

Post by Zoltán »

Resolume tries to re-use memory before releasing it. If you leave it for a few minutes, you should see VRAM usage drop.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply