Output Glitching

Post your questions here and we'll all try to help.
Post Reply
Audioteck
Met Resolume in a bar the other day
Posts: 2
Joined: Sun Jan 15, 2023 16:16

Output Glitching

Post by Audioteck »

We are having occasional glitches on our main 4K output from Arena. We are running 4K HDMI into a BM Terrenex which is converting to Fiber. We have a 4K monitor on the HDMI loop out of the Terrenex and we see the glitch there too. On an RTX 3070ti, not sure if there are recommended changes to the defaults for that card. PC is Ryzen 9 5900x 12-core with 64Gig of ram. Any help would be great!

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Output Glitching

Post by Zoltán »

How does the glitch look like?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

User avatar
Arvol
Might as well join the team
Posts: 2772
Joined: Thu Jun 18, 2015 17:36
Location: Oklahoma, USA

Re: Output Glitching

Post by Arvol »

BMD Terrenex's are flawed. They don't conform to the TI chips standards used inside and have major clock issues. This was confimred in person as infocomm when I had their lead engineer sit down with Novastars lead engineer and the owner of Canare cable. We where having all sorts of issues with ours (we invested $30,000 into these products) and since then we washed our hands ofthose boxes. Not sure if they've done any work on their designs since then. But in gerenal, BDM Terrenex boxes are full of issues. I would start troubleshooting there. We literally had to power cycle or discconect their input connectors to get a reclock upon changing sources or edids on a source.

Post Reply