OSC issues - BPM

Post your questions here and we'll all try to help.
Post Reply
User avatar
mowgli
Hasn't felt like this about software in a long time
Posts: 216
Joined: Wed Aug 05, 2009 17:28
Location: London

OSC issues - BPM

Post by mowgli »

I'm finding an increasing number of issues trying to make a custom touchOSC controller. After reading a lot of threads I assume that most of them, mainly the ones related to delayed or plain wrong OSC feedback from Res to touch OSC are caused by being on a wireless network, using a cable from laptop to router should fix this (I hope).
But I'm finding some very strange things. I added a label to display BPM and although it "works", if the BPM on Resolume displays 125.00BPM, touch OSC displays 0.24698795... Is there a way to fix this?
Collapsing wave functions
http://www.mowgli.tv

Zoltán
Team Resolume
Posts: 4808
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: OSC issues - BPM

Post by Zoltán »

if the BPM on Resolume displays 125.00BPM, touch OSC displays 0.24698795... Is there a way to fix this?
if you can do mathematical expressions in touchosc then you can calculate the value from the float.
the BPM range is 20-500 if I remember right 2-500 , and the osc float is 0.0-1.0

edit: the formula is: floatBPM*492+2 = BPM
Theatre sound engineer, photographer, programmer, aka ravensc.
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
VJ footage: https://goo.gl/58oHy7

Post Reply