Resolume Forum

I am preparing to control Chamsys MQ70 using art-net.

It is generally working without any problems, but

Trigger Clip
Play Head
Play Mode
only does not return to the default value when released.

Even if I play a cue, it sometimes does not return to the set value.

Is there any special setting method?

How do you release it?
Are you sending the 0 on the dmx channel?

Regarding the Clip value, I released it and sent DMX 000, but it wasn't recognized, so I changed the default value to 001 and it started working properly.

I decided to set the Play Mode and Play Head on the Clip side.