Enttec USB Pro Problems

Post your questions here and we'll all try to help.
Post Reply
movebandit
Hasn't felt like this about software in a long time
Posts: 194
Joined: Wed Sep 20, 2006 20:49
Location: Germany,Bielefeld

Enttec USB Pro Problems

Post by movebandit »

Hello,
i need some advice. Can´t get my USB Pro working with Arena. Tried nearly everything. All kinds of Drivers,Firmwares and Arena Versions. In the Enttec Pro Manager the DMX IN works, Interface is recognized by Arena, but i cant get any Input. Tried Manual Mapping,Learn and Auto Mapping. Any Suggestions ? Urgent Help needed !

Maze
Top
inabox
Met Resolume in a bar the other day
Posts: 13
Joined: Fri Dec 09, 2011 14:28

Re: Enttec USB Pro Problems

Post by inabox »

I'm getting the same problem, on Win7 64bit and win7 32bit and it's not a question of drives, if you try it on the same PC with arkaos media master pro demo it works
And It'll work if you use it on win XP
Top
movebandit
Hasn't felt like this about software in a long time
Posts: 194
Joined: Wed Sep 20, 2006 20:49
Location: Germany,Bielefeld

Re: Enttec USB Pro Problems

Post by movebandit »

Solution after 5 hours of trying: Found an old post from around 2011. Disable the Onboard Com Port in the Bios and it works fine....omg. Big Problem, small solution. SOLVED
Top
inabox
Met Resolume in a bar the other day
Posts: 13
Joined: Fri Dec 09, 2011 14:28

Re: Enttec USB Pro Problems

Post by inabox »

I went to bios and disabled the serial Port, thats it :!:

Does it make any sense :?:

Any way its working now, double solved
Top
Post Reply

Return to “Problems? Bugs? Solutions!”