Strobe effect breaks when freq to max

Post your questions here and we'll all try to help.
Post Reply
mfo
Posts: 350
Joined: Fri Oct 08, 2004 11:48

Strobe effect breaks when freq to max

Post by mfo »

Topic says it all, when Strobe effect's frequency goes to "1.0" it stops flickering. "0.999" still works..

User avatar
Arvol
Posts: 2893
Joined: Thu Jun 18, 2015 17:36
Location: Oklahoma, USA

Re: Strobe effect breaks when freq to max

Post by Arvol »

This is normal behavior. Has been this way since I started using Resolume. Just map your shortcut to stop at .999

User avatar
drazkers
Posts: 968
Joined: Wed May 18, 2011 10:54
Location: Brady V up in Canada

Re: Strobe effect breaks when freq to max

Post by drazkers »

mfo wrote: Mon Jul 02, 2018 13:54 Topic says it all, when Strobe effect's frequency goes to "1.0" it stops flickering. "0.999" still works..
I have a lot of functionality built around 1.0 and 0.0 doing this. I assumed it’s a feature.

mfo
Posts: 350
Joined: Fri Oct 08, 2004 11:48

Re: Strobe effect breaks when freq to max

Post by mfo »

Arvol wrote: Mon Jul 02, 2018 16:54 This is normal behavior. Has been this way since I started using Resolume. Just map your shortcut to stop at .999
of course, that's what i did. still seems a bug to me.

Joris
Posts: 5186
Joined: Fri May 22, 2009 11:38

Re: Strobe effect breaks when freq to max

Post by Joris »

The extremes of the strobe frequency param are set to be completely off at value 0 and completely on at value 1. This is done on purpose. Think of it as strobing infinitely slow and infinitely fast :ugeek:

If you don't like that behaviour, you can define your own envelope for the frequency param and save that as your preferred effect preset.

Post Reply