Hello Resolume warriors!
troubleshooting some fps problems
got a composition with 9 layers. if i'm pushing it using a lot of effects i get around 60 fps, but usually 70 fps when using a virtual output. sadly, as soon as i switch the virtual output for a real screen or projector everything drops to around 30. I understrand there might be a difference but it shouldn't be this high and i
I got a rather decent machine with a recent i7, GTX1070, 16gb ram and running all content (DXV3.0) from an M.2 SSD.
I've tried the following:
- checking framerates in both nvidia control panel and windows to set to 60hz
- turning on and off Vsync
- trying different monitors / projectors
- trying different cables
- checking in power settings if performance is set to maximum
- yes, the laptop is connected to the power
- trying 60fps clips and 30fps clips
none of this seems to make a difference in the behaviour, as soon as i send my output to an external screen the fps plummets
would be great if you could help me, thanks for your time