My raid is probably closer to 80MB/s read speed since its filling up
since its filling up? didn't get it!
80MB/s readspead is not fast for any RAID0 combination ....it's very slow! Is this your benchmark result?
I asked if using the dvx codec on a crappy gpu would actually be worse than not using it at all but got no response.
could be....give it a try and share your results. By the way, Resolume is not able to deal with CPU multithreads....in my special case with an i7 2600K Resolume never uses more than 20% of the CPU. never!
Right now I tested this for YOU!....just that you can get a feeling:
I have a bad single HDD in my PC (95MB/s read) beside the SSD drive (550MB/s read)
I took one fullHD movie 30fps FotoJPEG and converted it in DXV .....
then I stored these two movies on my HDD and played them with Resolume.
1x FullHD FotoJpeg = Resolume framerate breaks down from 60 to 30fps
3x FullHD DXV = Resolume still gives me 60 fps
4x FullHD DXV = Resolume breaks down to 35fps
Greetz
cosmowe
Just for your information:
720p 60Hz uncompressed = ca. 1 Gbit/s = 128MB/s
1080p 60Hz uncompressed = ca. 2,4 Gbit/s = 307,2MB/s
And here you can find some other tests i've made with a slower grafikcard and ssd's
http://www.resolume.com/forum/viewtopic ... &hilit=dxv