mapping problems

Pxlsx · Post by **Pxlsx** » Tue Sep 09, 2014 17:45

I have a 4.1.8 Resolume arena with a seriously mapping problem, when I choose the advanced option, the display shows an error like a glitch background. it's weird because it never happened before.
I need you to help me.
I try with other versions but is the same thing.

MacBook Pro OS X 10.9.4
2,4 GHz Intel Core i5
4 GB 1333 MHz DDR3

yosoypedro · Post by **yosoypedro** » Wed Sep 17, 2014 22:46

Any solutions? I think I may have experiment the same issue last weekend at a concert.

He2neg · Post by **He2neg** » Thu Sep 18, 2014 06:58

Did you check the status of your Grafik Card ? Maybe it allready burns

I had some weired stff going on while the fan was broken after some time of running stuff.

Joris · Post by **Joris** » Thu Sep 18, 2014 10:12

It sounds like you are using a graphic card that does not pack enough punch to run the Advanced Output.

What does the log report as the main OpenGL Renderer?

You can access the log by going into Resolume > Feedback > View Log and then scroll down to the part where it says 'Main OpenGL Renderer'

There's some screenshots on what to look for in this thread.

stereo-out · Post by **stereo-out** » Mon Sep 29, 2014 11:50

I HAVE BEEN EXPERIENCING THE SAME PROBLEM WITH MY MAC BOOK PRO AS WELL

MY CONFIG IS ALSO PRETTY GOOD BUT I STILL FACE THE SAME ISSUE

PLZZZZZZZZZZ HELP

Joris · Post by **Joris** » Mon Sep 29, 2014 12:17

The first thing is to make sure your caps lock is off.

Oaktown · Post by **Oaktown** » Mon Sep 29, 2014 16:10

Hey Stereo-Out, do you have a MBP with a discrete GPU or just the integrated GPU?

Resolume Forum

mapping problems

mapping problems

Re: mapping problems

Re: mapping problems

Re: mapping problems

Re: mapping problems

Re: mapping problems

Re: mapping problems