Not getting proper resolution for DISPLAY2

[jpf321]

We just started working with Arena v5.0.1 and have found a few small issues.

1) Advanced output no longer has ability to "reset to defaults" and once you do a "save & Close" there is no longer ability to Undo. Saving and loading and such is cumbersome.

2) Unable to see Display Resolutions in the Output menu from the main interface screen anymore. In order to get Display outputs, it seem that you must open Adv, Output and then pull down on the available outputs .

3) BIG PROBLEM: Resolume not getting proper resolution from the OS. See in the attached screenshot. The OS is properly detecting the Panasonic PT-DZ13K as recommended 1920x1200 .. however, Resolume is not properly detecting that resolution in it's Advanced Output options.

This is an Acer Aspire 5 Laptop running Windows 10. Dsplay info reports:
Monitor: Generic PnP
Renderer: AMD Radeon HD8750M
Gfx Cards: AMD Radeon HD 8650G + HD8750M Dual Graphics

Any help in getting the Arena 5 Advanced Outputs to recognize the resolution that the OS recognizes, 1920x1200 would be greatly appreciated.

Thanks

[Joris]

1) In Arena 5 you can get the same functionality as the old Reset to Default via Preset > New. This is exactly the same as what Reset to Default did in 4.

3) Yes, this is super annoying. You can fix it by making sure your Desktop Scaling Factor is set to 100%. More information can be found on our FAQ: http://resolume.com/support.

[jpf321]

Thanks Joris.

1) Doh!
2)
3) My projector just left the shop, but I will check it within the next few hours. Hopefully it's that simple.

[jpf321]

3) Worked out perfectly .. would post link here from your FAQ for others to find easily but prohibited .. instead search FAQ for "0x0"