The Question is if all your Adjustment Clip Effects are the same...
If that is so, then you just can use one and set the layer to ignore the colom trigger ( if you want to trigger the rest via coloms)
Or you may want to use more then one effekt layer so you can have layer A (everything the same) Layer B (different setting for each colom)
FX only on Masks - Possible?
Re: FX only on Masks - Possible?
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
Re: FX only on Masks - Possible?
Ah, yes - Ignoring the trigger is a VERY good idea.
And yes, ONE Adjustmentlayer should be enough, it all depends on Black/mid/Lights for a S/W-Animationmovie-Liveshow here.
Will give it a try, thank you!

And yes, ONE Adjustmentlayer should be enough, it all depends on Black/mid/Lights for a S/W-Animationmovie-Liveshow here.
Will give it a try, thank you!

Re: FX only on Masks - Possible?
So I see what you did there and i deserved it (again)Joris wrote: Tue Mar 12, 2019 15:28Why don't you try it and report back? I believe in you!would it also work with moving the clip via Transform section`?
To Solve this...
Use the Transform is not working.... Efect clip is taking the comp (so far / bellow) and using transform is moving the whole thing up, resulting in dubble the clip.
So Use Crop and everything is fine....
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
Re: FX only on Masks - Possible?
You can also add a Mask instead of a Crop to your Clip Effect. This way your Levels effect can be masked out with the benefit that this Mask can be any shape.
Re: FX only on Masks - Possible?
Aargh, ...
Everytime I think I got it, something is difficult at the end.
When I activate the »Ignore Column Trigger« functionality on the Adjustmentlayer (with the Levels-Plugin and Cropeffect in it) - why is this Layer shutting up nevertheless, when I start a next Column via the Column-button (See picture)?
Everytime I think I got it, something is difficult at the end.
When I activate the »Ignore Column Trigger« functionality on the Adjustmentlayer (with the Levels-Plugin and Cropeffect in it) - why is this Layer shutting up nevertheless, when I start a next Column via the Column-button (See picture)?
Re: FX only on Masks - Possible?
Try this, a simple fx clip with levels (I've added color to notice it in snapshot) with a simple jpg mask.
Then enable the Layer 'ignore column trigger', not in the clip itself.

Then enable the Layer 'ignore column trigger', not in the clip itself.
